Baxter E27

What does Baxter E27 mean?

E27 is a red rack limit switch error. The control is detecting the up and down limit switches at the same time, which is an impossible mechanical state, so the motor times out and the fault is reported. Sensing both limits simultaneously points to a switch or wiring fault. As a red error, E27 blocks heating and bake/cook cycles until it is resolved and cannot be dismissed.

Symptoms

• Red E27 "Rack Limit Switch Error" on the display
• Rack lift motor times out and stops
• Both up and down limits appear active at once
• Error cannot be cleared until fixed

Common causes

• Up and down limit switches detected simultaneously
• Shorted or stuck limit switch
• Wiring fault tying the two limit signals together
• Control input fault reading the limit switches

Diagnostic steps

1. 01

   Note this is a red limit switch error

   Heating and bake/cook cycles are blocked until the fault is resolved.

2. 02

   Turn off power to the oven

   Follow the red-error instruction to turn off power to the oven.

3. 03

   Do not operate the rack lift

   Conflicting limit signals indicate a switch or wiring fault that needs inspection.

4. 04

   Contact a Baxter authorized servicer

   The manual directs the user to contact a Baxter authorized servicer to resolve the issue.

When to call a professional

Call a Baxter authorized servicer for E27. Detecting both the up and down limits at once is an electrical fault—typically a shorted switch, miswiring, or a control input problem—that the operator cannot safely diagnose. The manual times out the motor, blocks heating, and directs contacting an authorized servicer. Tracing and correcting the limit-switch circuit is service-level work.