Smeg W01

What does Smeg W01 mean?

Smeg shows W01 as a warning. The display title reads "WARNING" with the description "LOW INLET WATER PRESSURE". As a warning rather than a blocking error, it alerts you that the water supplied to the appliance is below the expected pressure, which can affect steam and washing performance if not addressed.

Symptoms

• Display shows W01 with the title "WARNING"
• On-screen description reports low inlet water pressure
• Steam production may be weak or inconsistent
• Washing function may underperform

Common causes

• Inlet water pressure lower than required
• Water tap not fully open
• Restricted or partially blocked water supply line
• Low pressure in the building's water supply

Diagnostic steps

1. 01

   Check the water tap

   The manual's fault table directs you to check the water tap; make sure the supply tap is fully open.

2. 02

   Inspect the supply line

   Confirm the inlet hose is not kinked or restricted so water can reach the appliance at adequate pressure.

3. 03

   Verify building water pressure

   Check whether other outlets show low pressure, indicating the issue is upstream of the appliance.

4. 04

   Contact Technical Assistance if it persists

   If the warning continues with the supply confirmed open, contact Smeg Technical Assistance as the manual directs.

When to call a professional

W01 is a warning you can often clear by restoring proper water supply, but if pressure is confirmed adequate and the warning persists, the inlet valve or pressure sensing may need attention, which the manual treats as a Technical Assistance matter. Call a qualified Smeg technician rather than dismantling the water circuit yourself if the warning will not clear.