Jeros AL 06

What does Jeros AL 06 mean?

AL 06 means the wash frame motor has malfunctioned: the control detected the motor circuit disconnected or short-circuited, or the frame's minimum/maximum travel time was exceeded. The manual notes the machine can continue without the frame operating, and calls for an engineer if the alarm reoccurs.

Symptoms

• AL 06 shown on the operating panel display
• Wash frame stops operating; machine continues without it
• Frame travel takes too little or too long before the alarm appears

Common causes

• Wash frame motor circuit disconnected
• Wash frame motor short-circuited
• Frame minimum/maximum travel time exceeded

Diagnostic steps

1. 01

   Note that the machine can continue without the frame

   Per the manual, operation may continue without the wash frame moving — plan service rather than stopping mid-shift.

2. 02

   Switch the machine OFF and then ON again

   Power-cycle the machine to clear a transient frame-motor fault.

3. 03

   If AL 06 reoccurs, call an engineer

   A recurring frame-motor fault (wiring or travel-time) needs service-level diagnosis per the manual.

When to call a professional

The manual permits continued operation without the frame, but a recurring AL 06 is an engineer call-out. Motor-circuit faults and travel-time problems both live behind the machine's panels — authorised service territory on Jeros washers.