Perfect Fry CONTROL FAN

What does Perfect Fry CONTROL FAN mean?

This PFA-series SYSTEM ERROR means the control fan is not functioning properly. The fryer beeps twice, displays the alert, and de-energizes the heating element while the fans run. The control fan must be confirmed moving air with its blades turning, and any obstruction or wiring problem corrected, before the fryer returns to normal heating operation.

Symptoms

• LCD shows *** SYSTEM ERROR *** PLEASE CHECK CONTROL FAN
• Fryer beeps twice to signal the error
• Heating element is de-energized while fans run
• Control fan not moving air or blades not turning

Common causes

• Control fan is not functioning properly
• Fan blades are obstructed
• Loose or faulty electrical connection to the fan

Diagnostic steps

1. 01

   Check the control fan

   Check the control fan to see if it is moving air and the fan blades are moving.

2. 02

   Remove any obstruction

   Clear anything blocking the fan blades.

3. 03

   Check the connection

   Check the electrical connection to the control fan.

4. 04

   Confirm the error clears

   When corrected the fryer beeps twice to signal OK and resumes HEATING.

When to call a professional

If the control fan is unobstructed and connected but does not run or the error will not clear, the fan or its wiring needs professional attention. Contact your authorized service representative or Perfect Fry at 802-658-6600. The control fan helps keep electronics cool, so continuing to operate with it failed risks further damage; have qualified service personnel diagnose and replace it rather than bypassing the alert.