Perfect Fry DRAWER MOTOR

What does Perfect Fry DRAWER MOTOR mean?

This PFA-series SYSTEM ERROR means the drawer motor has been obstructed. The fryer beeps twice, displays the alert, and de-energizes the heating element while the fans run. The cause of the obstruction must be found and corrected before the fryer is returned to normal use so the drawer motor can move freely again.

Symptoms

• LCD shows *** SYSTEM ERROR *** PLEASE CHECK DRAWER MOTOR
• Fryer beeps twice to signal the error
• Heating element is de-energized while fans run
• Drawer does not move in and out as expected

Common causes

• Drawer motor has been obstructed
• Food, parts, or debris jamming the drawer mechanism
• Drawer shovel or sleeve not installed correctly

Diagnostic steps

1. 01

   Find the obstruction

   Check for the cause of obstruction before returning the fryer to normal use.

2. 02

   Clear the jam

   Correct the cause of the obstruction so the drawer can move freely.

3. 03

   Verify drawer parts

   Confirm the drawer shovel and sleeve are installed correctly and not binding.

4. 04

   Confirm the error clears

   When corrected the fryer beeps twice to signal OK and resumes HEATING.

When to call a professional

If no obstruction is found but the drawer motor SYSTEM ERROR persists, or the drawer still will not move after the jam is cleared, the motor or its wiring may need service. Contact your authorized service representative or Perfect Fry at 802-658-6600. The troubleshooting table notes a non-working drawer motor may require replacement, which qualified service personnel should perform rather than forcing the mechanism.